Maintenance
148 Avaya Enterprise Survivable Servers (ESS) Users Guide
When disable ess is run from a Main server:
● Any and all cluster IDs may be disabled including the Main server itself.
● A results screen appears, indicating that the disable operation is in progress. See
Figure 43: disable ess command TEST RESULTS example
on page 148.
● Use status ess cluster to confirm that the disable operation succeeded.
The complete operation for disable ess on a Main server may take several minutes. The
request is first sent in a message from the Main server to the ESS server. Once the ESS server
receives the message, it changes to the ESS disabled state and performs a reset system 4
operation. After the reset, the ESS server re-registers with the Main server. When this
re-registration is complete, the Main server receives the results of the disable request.
Figure 43
shows typical result for disable ess cluster 90.
Figure 43: disable ess command TEST RESULTS example
Action/Object Qualifier Qualifier Description Login
disable ess all
cluster n
disable all ESS servers
Number (1 - 999) of the cluster ID for the target
ESS server or Main server.
Examples:
disable ess all
disable ess cluster 9
init
inads
craft
cust su
disable ess cluster 90
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
CL 090 ESS 1607 IN PROGRESS
Command successfully completed
Command:
To Next Page
Loading...
Need help?
General
