© 2019 Avaya Inc. All rights reserved.
© 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
• Assure that the remote control is equipped with 2 AAA charged batteries.
• Unplug the codec unit from power.
• Press the Back key and the OK key together, until the small blue LED on top of the
remote quickly flashes a few times.
• While the LED light is still flashing, plug the codec unit into power while keeping the
remote control close to the unit. The remote control led should stop flashing to show
successful pair.
• If the pairing fails, assure to disconnect all the cables from the CU, including USB.
Remote Control Keys
Small Keyboard Keys – Press FN to switch between Yellow and White symbols
Once the remote control is paired with your Avaya CU360, the CU360 Video-collaboration
application will usually receive the key events when it is in foreground and as the input
To Next Page
Loading...
