Avaya IX Collaboration Unit CU360 - Supported Web Browsers; Supported Resolutions

© 2019 Avaya Inc. All rights reserved.
© 2015 Avaya Inc. All rights reserved. NDA Confidential, Use pursuant to your agreement.
Table 1: LED Colors
Condition
Circle LED Color
Circle LED Effect
Lateral Led strips
Alarms
Red
Red
Idle
Yellow
Idle, Mute/System Sleep
Blue
Blue
In a call
Green
In a call, Mute
Blue
Blue
In a call, Privacy
Green (Blue if Audio mute)
Red
Upgrade in progress or
incoming/outgoing call
establishing
Red
Rotating
Red
Network Connectivity
Before configuring your device for the first time, assure that the device is connected to an
Ethernet or Wi-Fi network.
Please be aware that it is strongly suggested to NOT connect both Ethernet and Wi-Fi
network, except in particular conditions (see Known Issues for Network ).
Please note that an IP address is automatically assigned to the unit if you connect the unit to
the network using the Ethernet and your network is equipped with a DHCP server,
To connect the unit to the network using Wi-Fi, you need to select the proper Wi-Fi network
in the Android Settings and insert the credentials and the authentication type.
Wi-Fi and Bluetooth settings can be accessed in
[GUI]CONFIGURE>QUICK SETUP
[GUI] CONFIGURE > ADVANCED > [ADMINISTRATOR PIN] > SYSTEM>SECURITY>SETTINGS
Security Settings