• Browse for the file (.exe) saved locally on your computer and upload it to the web
browser. Once uploaded press Upload-Install.
• The file will be uploaded to your unit (Status percentage shows how many bytes have
been transferred) and then installed.
• Follow the progress of the update on the web browser. At the end of the installation
the web client might disconnect. Wait automatic reconnection or press F5. You might
need to login again.
Software Upgrade via Web – Choose Upgrade Package
Software Upgrade via Web – Choose Upgrade Package
Upgrade via Equinox Management – Automatic Mode
• Your CU must be added as managed endpoint in Equinox Management
• (Requires Equinox Management 9.1.0.365 or later)
To Next Page
Loading...
