© 2019 Avaya Inc. All rights reserved
Release Notes for Avaya IX Collaboration Unit CU360 Known Issues 21
Your recording can become
corrupted if USB key is
unplugged while a USB
recording is in progress.
Stop the recording before unplugging the USB key.
“Repair this drive” alert on
Windows PC about the USB key,
when it is unplugged from a
CU360, and then plugged to a
PC.
This notice is a false alarm, if the repair procedure is
executed there are no issues found on the USB
storage.
In any case, to avoid the alert, please go to CU360
OS Settings> Settings >Storage > and press the
“Eject” symbol ( ) before pulling out the USB
storage.
Save Recording status seems
correct, but the file is not
available in AESR.
Verify that your Owner name and the Organization
ID are correct. Transfer status shown by the Codec
Unit is relative to FTP transfer.
To record your CU-360 screen to
a local USB storage device,
insert it in one USB slot. Use a
USB storage device formatted
with FAT32, EXT2, EXT3, EXT4.
Other formats, even if
supported, are not
recommended and could cause
issues.
Web video is not supported in
this release
When screen link is used, audio
is not transmitted from PC/Mac
Manual Presence Status is
forced to "Busy" when in a SIP
call when using IP Office as
Presence and SIP Server.
Offline presence status in not
correctly displayed by the Avaya
endpoint when using Aura
Presence Server 7.1 (pre-
release)
Select “Aura 7.1” as presence server type.
It is not possible to subscribe to
accounts used by One-X Portal
clients.
As a workaround you can temporarily assign the
same account to another Codec Unit, subscribe to it
from your Codec Unit, and then move it again to the
client.
Avaya One-X
Portal for IP Office.
Contacts are not notified of
subscription requests. It is not
possible to grant/revoke
subscription request.
Endpoints must manually
subscribe to other contacts to
view their presence
MSS is not supported in this
release
Codec Unit Auto-Provisioning
Service may be interrupted,
including for maintenance,
repairs, upgrades, or equipment
or network failures. We may
discontinue certain features and
the support for certain Codec
Unit devices at any time. Events
beyond our control may affect
our service, such as force
majeure events.
Cloud Service
Availability
When Codec Unit outside
company premises is managed
by Equinox Management, it
cannot join an existing meeting
which requires Path Finder
access (H323 call).
Temporarily disable Equinox Management or place
a SIP call to join the meeting.
To temporarily disable Equinox Management,
change Configure> Advanced>Remote
Access>Equinox Management>Mode to Local; and
Automatic IP address to No; write down the original
To Next Page
Loading...
