Avaya J100 Series Installing

Chapter 8: Phone administration and
configuration
Accessing the Admin menu during phone startup
Before you begin
Ensure you set the following parameters in the Settings file:
• PROCSTAT: To administer the phone using admin menu, set the parameter to zero.
• PROCPSWD or ADMIN_PASSWORD: The default password is 27238. You must change the
default password at the time of initial installation.
Procedure
1. Press Main Menu softkey.
2. On the Access code screen, enter the admin menu password using the dialpad.
3. Press Enter.
Parameters for managing Admin menu
Parameter name
Default value Description
PROCSTAT 0 Specifies whether Admin menu is used for
device configuration.
Value operation:
• 0: Specifies that the phone is administered
through Admin menu.
• 1: Specifies that the phone is not administered
through Admin menu.
PROCPSWD 27238 Specifies an authentication code for accessing
Admin menu.
Value operation:
• 27238: Specifies that the authentication code
27238 is set for accessing Admin menu.
Table continues…
December 2018 Installing and Administering Avaya J100 Series IP Phones 144
Comments on this document? infodev@avaya.com

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)