Avaya J100 Series - Page 264

Parameter name Default
value
Description
SOFTKEY_CONFIGURATION 0,1,2 Specifies which feature will show
up on which softkey on the Avaya
J129 IP Phonescreens.
The features are defined as follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
SPEAKERSTAT 2 Specifies the operation of the
speakerphone.
Value Operation:
• 0: Speakerphone disabled
• 1: One-way speaker (also called
monitor) enabled.
• 2: Full (two-way) speakerphone
enabled.
Note:
This parameter is not
supported on Avaya J129 IP
Phone.
SSH_ALLOWED 2 Specifies if SSH is supported.
Value Operation:
• 0: Disabled
• 1: Enabled
• 2: Configured using local admin
procedure. When this mode is
configured, then by default the
SSH server is disabled.
SSH_BANNER_FILE Null Specifies the file name or URL for a
custom SSH banner file.
If the value is null, english banner is
used for SSH.
The value can contain 0 to 255
characters.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 264
Comments on this document? infodev@avaya.com