Avaya J129 - Page 197

Parameter name Default
value
Description
Value Operation:
• 0: Turns off audible alerting. User
cannot adjust ringer volume.
• 1: Turns on audible alerting. User
can adjust ringer volume, but
cannot turn off audible alerting.
• 2: Turns off audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
• 3: Turns on audible alerting. User
can adjust ringer volume and can
turn off audible alerting.
Note:
Avaya J129 IP Phone does not
support this parameter.
AUDIOENV 0 Specifies the audio environment
index and enables you to customize
the phone's audio performance.
Valid values are 0 through299.
This parameter affects settings for
AGC dynamic range and handset
noise reduction thresholds. Always
consult Avaya before changing this
parameter.
AUDIOPATH 1 Specifies the audio path for the
phone.
Value Operation:
• 1: For speaker.
• 2: For headset.
AUDIOSTHD Specifies the level of sidetone in
the headset.
Value Operation:
• 0: Normal level for most users
• 1: One level softer than normal
• 2: Two levels softer than normal
• 3: Three levels softer than normal
• 4: Off which means inaudible
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 197
Comments on this document? infodev@avaya.com