Avaya J129 - Page 198

Parameter name Default
value
Description
• 5: One level louder than normal
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
AUDIOSTHS 0 Specifies the level of sidetone in
the handset.
Value Operation:
• 0: Normal level for most users
• 1: Three levels softer than normal
• 2: Inaudible
• 3: One level softer than normal
• 4: Two levels softer than normal
• 5: Four levels softer than normal
• 6: Five levels softer than normal
• 7: Six levels softer than normal
• 8: One level louder than normal
• 9: Two levels louder than normal
AUTH Specifies whether the script files
are downloaded from an
authenticated server over an
HTTPS link.
Value Operation:
• 0: Optional
• 1: Mandatory
AUTHCTRLSTAT 0 Specifies if the enhanced
debugging capabilities can be
activated from the SSH server by
the Avaya technicians only.
Value Operation:
• 0: Enhanced debugging
capabilities are disabled.
• 1: Enhanced debugging
capabilities are enabled.
The parameter must be set to 1
only for the debugging period by
Avaya technicians. Set the
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 198
Comments on this document? infodev@avaya.com