Avaya J129 - Page 225

Parameter name Default
value
Description
GMTOFFSET 0:00 Specifies the time offset from GMT
in hours and minutes.
The format begins with an optional
+ or - (+ is assumed if omitted),
followed by 0 through 12 (hours),
followed by a colon (:), followed by
00 through 59 (minutes).
GROUP 0 Specifies specifically-designated
groups of phones by using IF
statements based on the GROUP
parameter.
The value of GROUP can be set
manually in a phone by using the
GROUP local admin procedure.
The default value of GROUP in
each phone is 0, and the maximum
value is 999.
GUESTDURATION 2 Specifies the duration (in hours)
before a Guest Login or a visiting
user login is automatically logged
off if the phone is idle.
Valid values are integers from 1 to
12.
GUESTLOGINSTAT 0 Specifies whether the Guest Login
feature is available to users.
Value Operation:
• 0: The feature is not available.
• 1: The feature is availble..
GUESTWARNING 5 Specifies the number of minutes,
before time specified by
GUESTDURATION, that a warning
of the automatic logoff is initially
presented to the Guest or Visiting
User.
Valid values are integers from 1 to
15.
H
HANDSET_PROFILE_DEFAULT 1 Specifies the number of the default
handset audio profile.
Valid values are 1 through 20.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 225
Comments on this document? infodev@avaya.com