Avaya J129 - Page 227

Parameter name Default
value
Description
active. This is used for Call
Center setting.
HOMEIDLETIME 10 Specifies the number of minutes of
idle time after which the Home
screen is displayed.
Valid values are 0 through 30.
A value of 0 means that the Home
screen is not displayed
automatically when the phone is
idle.
Note:
Only Avaya J129 IP Phone
supports this feature.
HTTPEXCEPTIONDOMAINS Null Specifies a list of one or more
domains, separated by commas
without any intervening spaces, for
which HTTPPROXY is not used.
The value can contain 0 to 255
characters. The default value is
null.
HTTPPORT 80 Sets the TCP port used for HTTP
file downloads from non-Avaya
servers.
Values range from 0 to 65535.
HTTPPROXY Null Specifies the address of the HTTP
proxy server used by SIP phones to
access an SCEP server that is not
on the enterprise network.
Valid value can contain zero or one
IP address in dotted decimal or
DNS name format, optionally
followed by a colon and a TCP port
number.
The value can contain 0 to 255
characters.
HTTPSRVR Null Specifies zero or more HTTP
server IP addresses to download
configuration script files. The
addresses must be separated by
commas without any intervening
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 227
Comments on this document? infodev@avaya.com