© 2020 Avaya Inc. All Rights Reserved.
Back
1. Headset Jack—To connect the headset.
2. 5V DC Jack—To connect the power supply.
3. Network port—To connect the Ethernet cable.
4. PC port—To connect the computer. Note: PC
port is disabled when a Wi-Fi network is used.
1
2
3
4
8
7
6
5
PoE
L H
5. WLAN Module Panel—To connect the power
supply.
6. USB Port—To connect the USB device.
7. PoE Slide Switch To set the PoE value to one of
the following:
▪ L: Class 1
▪ H: Class 2
8. Handset Jack—To connect the handset.
To Next Page
Loading...
