Avaya one-X Installation And Maintenance Guide

Pre-Installation Checklist
Issue 1 May 2007 11
3. The following circuit packs are installed on the switch:
● TN2602 IP Media Processor circuit pack. Sites with a TN2302 IP Media
Processor circuit pack are strongly encouraged to install a TN2602 circuit pack.
● TN799B, C, or D Control-LAN (C-LAN) circuit pack.
!
Important:
Important: IP telephone firmware Release 1.0 or greater requires TN799C V3 or
greater C-LAN circuit pack(s). For more information, see the
Communication Manager Software and Firmware Compatibility Matrix
on the Avaya support Web site h
ttp://www.avaya.com/support.
4. The Communication Manager (CM) call server is configured correctly, as described in
the Avaya one-X™ Deskphone Edition for 9600 Series SIP IP Telephones
Administrator Guide and Avaya Communication Manager documentation. Both
documents are available at h
ttp://www.avaya.com/support.
5. The DHCP server and application are administered as described in the Avaya
one-X™ Deskphone Edition for 9600 Series SIP IP Telephones Administrator Guide.
6. The HTTP server and application are administered as described in the Avaya
one-X™ Deskphone Edition for 9600 Series SIP IP Telephones Administrator Guide.
7. The SIP upgrade script and application files from the Avaya Support Web site,
http://www.avaya.com/support
, are loaded correctly on the HTTP/HTTPS server.
8. If applicable, the Voice Mail server is administered as described in the Avaya one-X™
Deskphone Edition for 9600 Series SIP IP Telephones Administrator Guide.
Notes:
- Any or all of the server applications mentioned in items 5-8 can be co-resident on the
same hardware, subject to the specific restrictions of each individual application.
- See the Avaya one-X™ Deskphone Edition for 9600 Series SIP IP Telephones
Administrator Guide for more information about:
Note:
● administering other network equipment,
● administering applications like firewalls, and
● information about topics like port utilization.
Requirements to Verify for Each IP Telephone
9. You have an extension number and an Avaya Communication Manager security code
(password) for each applicable IP telephone.
10. You have an OPTIM extension number and an Avaya Communication Manager
security code (password) for each telephone, and have configured SIP Enablement
Services for each telephone.
11. A Category 5e LAN jack is available at each telephone site.
12. Electrical power is provided to each telephone by a Telephone Power Module (DC
power jack) (must be ordered separately). If the LAN will supply IEEE-standard power
to the telephone, no power module is required.
Verify These Network Requirements (continued)
13. 1 Category 5e modular line cord is available for the connection between the IP
telephone and the PC, if applicable.

Avaya one-X Specifications

General

Brand	Avaya
Model	one-X
Category	IP Phone
Language	English