Avaya one-X - Call Control Operations; Hold, Mute, and Transfer Calls

Local Administrative Options
32 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
not affect the software load itself. If you have upgraded the telephone, the telephone retains the
latest software. Once you have cleared a telephone, you can administer it normally.
!
CAUTION:
CAUTION: This procedure erases all administered data, without any possibility of recovering
the data.
Use the following procedure to clear the telephone of its administrative, user-assigned, and
options values.
1. When you select CLEAR from the Admin Procedures Screen, the telephone displays a
confirmation screen.
2. If you do not want to clear all values, press No to terminate the procedure and retain the
current values. Press Yes to clear all values to their initial default values.
The telephone displays the following text:
The telephone is cleared to its “out of the box” state, resetting the following values to their
factory defaults:
● All system values and system initialization values.
● User options, parameter settings, identifiers and password.
● Any user data like Contact Lists or Call Logs are deleted.
After clearing the values, the telephone resets.
Disable/Enable Debug Mode
Use the following procedure to turn the debug mode for the button module serial port on or off.
!
CAUTION:
CAUTION: A DEBUG setting of “On” disables any adapter plugged into Slot 2.
1. When you select DEBUG... from the Admin Procedures Screen, the following text displays:
where the setting shown is the text string associated with the current system value of
DEBUG, defined as:
● “On” if the DEBUG_ENABLED system value is “1”.
● “Off” if the DEBUG_ENABLED system value is “0”.
Clearing values.
Debug Mode On