Avaya one-X - Integrating Other Applications; Exchange Server Integration Setup

Local Administrative Options
28 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
Note:
Note: Unless otherwise prohibited using administration, a user can view but not change
most of the parameters associated with Craft procedures. For more information,
see the applicable users guide(s).
Shown As Craft Procedure Purpose See
ADDR... Network Address information
programming
Static Addressing Installation
on
page 29.
AGC... Enable/disable Automatic Gain
Control
Disable/Enable Automatic Gain
Control on page 31.
CLEAR... Clear all values to factory
defaults
C
lear Procedure on page 31.
DEBUG... Enable/disable Debug Mode Disable/Enable Debug Mode on
page 32.
GROUP... Set the Group Identifier G
roup Identifier on page 33.
INT... Network Interface Control Interface Control on page 33.
LOG... Enable/disable Event Logging D
isable/Enable Event Logging on
page 34.
LOGOUT Log off the telephone Logout on page 35.
RESET
VALUES
Reset system initialization
values to defaults
R
eset System Values on page 36.
RESTART
PHONE
Restart the telephone Restart the Telephone on page 36.
SIG... Set the signaling protocol
download flag
Signaling Protocol Identifie
r on page 37.
SIP... Configure SIP call settings Configuring SIP Settings on page 38.
SNTP... Configure the time server
settings
Configuring Time Server Settings
on
page 39.
SSON... Set the Site-Specific Option
Number
Site-Specific Option Number Setting on
page 37.
VIEW View current parameter values
and file names
The View Administrative Option
on
page 39.