Restart Scenarios
60 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
4. VLAN verification and tagging occur. The following message displays:
where n is the VLAN ID being used.
5. The HTTP process starts with an HTTP GET command to obtain a URI for the HTTP server,
which displays on the telephones’ Title Line. When connected, the HTTP server sends and
identifies an upgrade script.
The GET message might have to be sent several times. Each time the GET message is
sent, the URI for the current HTTP request displays.
6. When the telephone determines that the application file received is valid, the following
message displays:
where s is the number of elapsed seconds while non-volatile memory is erased.
7. While the application file is saved in flash memory, a progress bar shows the status:
8. The script file is processed. The software determines that the name of the boot code file in
the telephone (BOOTNAME) is the latest version, and the name of the application file in the
telephone is the same as APPNAME.
9. System-specific registration with the call server is invoked.
10. When registration finishes, a dial tone is available on the telephone.
VLAN ID = n
File Obtained;please wait...
s secs
To Next Page
Loading...
