© 2017 Avaya Inc. All rights reserved
Release Notes for Avaya Scopia® XT Series Resolved Issues | 34
Resolved Issues
Version 9.1.0.37 of the Avaya XT Series includes resolved issues from previous GA version
9.0.2.44 (part of Avaya Equinox Solution 9.0.2, August 2017).
Table 6: Resolved Issues
Fixed an issue when querying recording status with AT command AT[?SNA
Even if the MSS is set to no and the call is not MSS in Diagnostic it is displayed MSS
Using GUI the fields setting in Advanced > Network > Glan1 > VLAN are not saved
Scopia Management Roster not available because connection on Port 3336 not active at the XT boot
XT displays an old dynamic address when connected to a network without DHCP server
XT systems cannot register to SIP server using IPv6 addresses
XT systems cannot make outgoing SIP calls if IPv6 registered to a SIP server
XT system is not able to make a direct IP H323 call when it fails registering to the configured GK.
XT fails registering to GK in scenarios with both networks
XT fails registering to a SIP server in scenarios with both network interfaces plugged
The text displayed inconsistent between XT and WebRTC/AE when shared whiteboard and uses Text
tools. Fixed also Unicode and text length issue
Displayed wrong remote name for SIP outgoing calls in the diagnostic if XT has the field “SIP
Authentication Name” not empty
Adding favorites from remote contacts, doesn't insert the number to call inside the new contact
RVXT5000-2220
1-13133421642
Using Contacts in the LDAP remote directory causes the XT to reboot
Displayed wrong remote name for SIP outgoing calls in the diagnostic
Sent RTCP Jitter statistics become zero every time the related RTP stream SN cycles
XT Endpoint not able to resolve correctly a SIP call FQDN when both GLAN cards are active
XT devices Do not Register to IP Office when certificate chain length is more than 5
[XTE with XTPCControl – new app] When XTE’s menu is activated by incoming call or pressing C with
the remote control, mouse hook on XTPCControl app could not work properly (remains confined to
XT’s monitor).
Fixed a very rare issue where the H265 encoder could block at start up in XT7100
tart up
Added a fix for USB manual camera focus value
Fixed an issue where XT CS package could not be retrieved by Equinox management if XT was
controlled via cloud connection
Fixed too long translations in German and Russian not fitting in the available space and cropping other
fields (Call MSS and System Customization )
Removed misleading info for port ranges in automatic mode. The limits are applied only to manual
mode, so they are not displayed. In automatic mode ephemeral port range is used, in the range
[32768..61000]
Fixed an issue about sent RTCP Jitter statistics becoming zero every time the related RTP stream SN
cycles
RVXT5000-2183
1-13106951688
In presence of multiple Presentation requests the XT Endpoint could instead switch its DVI Input in
place of the Main Camera
RVXT5000-2185
1-13116438404
AT Command "DT" (Field A) returns the E.164 number instead of the caller IP Address when there is no
GK connection
RVXT5000-2187
1-13120294221
Fixed an issue in Web UI -> Contacts section for French language
Full screen contextual menu has no effect when right clicking with the mouse on the "major" window
in XTE240 using XTPCControl app.
RVXT5000-2228 1-13133421642 -
Fixed an issue of XT video flickering in some conditions when repeatedly and quickly changing PIP
on/off
Contacts "Add to Favorites" button locks the XT Web Server and the whole Contacts section when
using cloud connections
SIP/TLS: corrected an issue in the analysis of the certificate returned by the SIP server. Retrieving the
certificate extensions, a memory overflow could occur, causing a crash, if some extensions where
To Next Page
Loading...
