Avaya Scopia XT Executive

To Next Page

To Previous Page

Figure 89: Setting call answer preferences2

2. Select the required option from the Automatic answer list:3

• Select Yes always for the system to automatically answer an incoming call. The system4

will not prompt you to accept a call if the display shows the Home page. This is useful5

for meeting rooms, where endpoints often dial in to that meeting room.6

• Select Yes trusted always for the system to automatically answer incoming calls only7

from trusted contacts. The system will not prompt you to accept a call if the display8

shows the Home page. This is useful for meeting rooms, where endpoints often dial in to9

that meeting room.10

You can indicate if a contact should be trusted when you add or modify the contact’s11

information (see

Finding Changing or Deleting Contacts on page 51).12

• Select Never to always manually accept a call.13

• Select Yes if not in a call (only XT Series with a built-in MCU) to automatically answer14

when the system is not in a call. During a call, it displays an incoming call notification. If15

you accept an incoming call during a call, you add the caller to your videoconference.16

• Select Yes trusted if not in a call (only XT Series with a built-in MCU) to automatically17

answer when the system is not in a call, for trusted contacts only. During a call, it18

displays an incoming call notification. If you accept an incoming call during a call, you19

add the caller to your videoconference.20

You can indicate if a contact should be trusted when you add or modify the contact’s21

information (see

Finding Changing or Deleting Contacts on page 51).22

3. (Optional) Enter the number of rings in the Answer after (Rings) list to specify after how23

many rings the system accepts a call. This option is relevant only if automatic answering is24

enabled.25

4. From the web interface only, select Save.26

Avaya Scopia XT Executive - Page 102