Avaya Scopia XT Executive - Controlling the XT Series

Procedure1
1.
Turn on the XT Codec Unit by pressing the
Power key on the XT Remote Control Unit.2
2. (XT Executive only) Connect your computer to use the XT Series as your monitor, as3
described in
Connecting a Computer to the XT Series using the DVI port on page 72.4
3. Configure the basic settings required to start using the XT Series, as described in 5
Configuring Basic Settings with the Quick Setup Wizard on page 35.6
You can use the XT Remote Control Unit or Scopia
®
Control as well as the web interface7
to control the XT Series (see Controlling the XT Series on page 20).8
4. (XT Executive only) To use your computer's mouse and keyboard to make video calls from9
XT Series and to customize your settings, see Navigating Menus with the Keyboard and10
Mouse on page 29.11
5. Set up your phonebook to easily dial your contacts, as described in
Finding, Adding,12
Changing or Deleting Contacts on page 51.13
6. You can now start video calls and meetings (see Starting a New Call on page 47).14
7. If your endpoint has an embedded MCU (license required), you can also host15
videoconferences, as described in
Moderating Meetings on page 88.16
8. Customize XT Series settings to best fit your needs, as described in Configuring Advanced17
User Settings on page 101.18
Related links19
Getting Started on page 1920
Controlling the XT Series21
There are a number of ways to interact with the Avaya Scopia
®
XT Series:22
• Use the XT Remote Control Unit locally on the endpoint itself to navigate the menus (GUI)23
and perform user functions and advanced configuration. You view the results on a connected24
monitor.25
• (XT Executive only) Use a keyboard and mouse of a computer connected to the endpoint to26
navigate its menus instead of the XT Remote Control Unit. This also requires a connected27
monitor.28
• Use the Scopia
®
Control app for iOS devices to control user-level functionality of the XT29
Series via an intuitive touch interface. This app is limited to user features, and does not30
extend to administration or advanced configuration. For more information, see User Guide for31
Scopia
®
Control.32
• Use the XT Series's web interface to perform nearly all features from the unit's web page.33
• Use Equinox Management's administrator web interface to perform system upgrades,34
backups, and add your endpoint to the organization's address book (see Deployment Guide35
for Avaya Scopia
®
XT Series).36
Getting Started
December 2017 Avaya Scopia
®
XT Series User Guide 20
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)