1
Figure 11: Entry method displayed to the right of an input field2
During a videoconference, you can send DTMF tones via the keypad. DTMF is often used to3
communicate with an MCU or other device which accepts DTMF commands. For example, to4
display the DTMF menu in a call hosted on the Scopia Elite MCU or the Equinox Conferencing5
Media Server, press * at any time. For more information, see User Guide for Scopia Elite MCU.6
Some additional shortcuts from the XT Remote Control Unit include:7
• Press and hold a number key to recall a camera preset (0-9).8
• [XTE240] In the Layouts page, press the 'near/far' key to switch between your computer and9
the remote computer.10
• [XTE240] Press and hold Inputs to toggle between your computer and the remote content,11
when receiving a presentation.12
Table 2: Remote Control Shortcuts
Keyboard Simplified Remote
Control
Advanced Remote
Control
Notes/Tips
Esc Back Back To move the current
camera when you are in
the main menu, press C
or Back. Press C again
to access the main
menu.
F1 -- Help
F2, F6 Layouts Pip For example, you can
see the remote video in
a big window and your
local video in a smaller
window.
F3 Far/Near Far/Near Far/Near switches
between the local and
remote cameras. For
example, when the Far
icon appears, all inputs,
presets, and camera
movements are directed
towards the far camera
and far active speaker.
F4 Holding the Layouts key Layouts Controls the content of
the visible windows. For
example, you can
Table continues…
Controlling the XT Series
December 2017 Avaya Scopia
®
XT Series User Guide 25
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
