Important:
When a meeting is hosted by the Scopia Elite MCU or the Equinox Conferencing Media1
Server, you may need to enter a PIN if you are not the moderator and attempt a moderator-2
only action (depending on whether or not the meeting has PIN-protected moderator features).3
For meetings hosted by a standalone (not built-in) MCU, use DTMF to issue instructions to the4
hosting MCU by pressing the XT Remote Control Unit keypad during the call, according to the5
MCU’s documentation. For example, in meetings hosted on the Scopia Elite MCU or the Equinox6
Conferencing Media Server, press * to access the MCU menu (see User Guide for Scopia Elite7
MCU for more information).8
Procedure9
1. Access the active videoconference. From the XT Series web interface, select Participants10
in the meeting window. From the endpoint, press ok/menu to access the videoconference11
menu, and select Participants.12
Your own endpoint is listed as Local in the participant list, and you can select it to perform13
a moderator task on your own endpoint.14
15
Figure 75: Moderating a hosted videoconference16
2. To invite someone to join the meeting, select Invite a new participant.17
You can choose an endpoint from the contacts, dial directly or choose one recently dialed.18
Moderating a Videoconference
December 2017 Avaya Scopia
®
XT Series User Guide 89
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT—December 15, 2017—1:33 PM (UTC)
To Next Page
Loading...
