Avaya Scopia XT7100

To Next Page

To Previous Page

The camera moves to its sleep position when it is disabled, or on the Scopia

XT Executive

the embedded camera's LED turns off.

The system sends a placeholder slide to remote participants, and displays the icon on

your display.

3. To block your audio and video and hide your participation in the meeting by removing your

space in participants' video layout, access the in-meeting settings. From the XT Series web

interface, select Meeting > Hide Myself. From the endpoint's in-call menu, select Meeting

Options > Hide Myself.

This feature is only available when your endpoint hosts the meeting on its built-in MCU.

Figure 63: Hiding your presence in a meeting

4. To block your video by default, access the call settings. From the XT Series web interface,

select Basic Settings > Call-Answer Mode > General. From the endpoint's main menu,

select Configure > Calling.

Figure 64: Call settings

5. Set Privacy or Video Privacy to Yes.

6. From the web interface only, select Save.

Avaya Scopia XT7100 - Page 65