Avaya Scopia XT7100 - Setting PIN Codes for the XT Series

To Next Page

To Previous Page

Setting PIN Codes for the XT Series

About this task

The PIN for basic settings is disabled by default. You can enable it to require users to enter the PIN

for all basic settings, such as changing the interface language. The default value for this PIN is

1234.

Before you begin

If configuring from the endpoint, you must first enable advanced configuration, as described in

Deployment Guide for Avaya Scopia

XT Series.

To modify the PIN from the web interface, you must be connected via HTTPS (see Deployment

Guide for Avaya Scopia

XT Series).

Procedure

1. Access the PIN settings. From the XT Series web interface, select Administrator Settings >

Utilities > PIN Protect Settings. From the endpoint's main menu, select Configure >

Advanced > Utilities > PIN Protect Settings.

Figure 83: Modifying the administrator PIN

2. Select Basic Settings to set or change the user's PIN code.

3. Enter the current PIN code. The default PIN is 1234.

4. Enter your new 4 digit PIN code, and re-enter if required.

5. From the web interface only, select Save.

Related product manuals