Confirming Call Disconnections
About this task
To prevent accidental disconnection from a call, you can configure the system to confirm before a
call is disconnected. By default, calls are disconnected when a participant ends the call, without
requiring a confirmation.
Procedure
1. Access the call settings. From the XT Series web interface, select Basic Settings > Call-
Answer Mode > General. From the endpoint's main menu, select Configure > Calling.
Figure 84: Calling preferences
2. Set Confirm Disconnect to Yes.
3. From the web interface only, select Save.
Related Links
Configuring Advanced User Settings on page 77
Confirming Call Disconnections
April 2015 Avaya Scopia
®
XT Series User Guide 85
Comments? infodev@avaya.com
To Next Page
Loading...
