AVer EVC170 - Page 59

56
Change EZDraw Password
Select General Setting
│
Administrator and press
.
Here allows you to change password of EZDraw.
EZDraw password is used when user use
EZDraw on tablet to connect to EVC system.
EVC system support up to 10 users to connect to
EVC system by EZDraw.
The default password is “1234”
Enable VCLine/ScreenShare
Select General Setting
│
Administrator and press
.
Here allows you to enable function of VCLink
and ScreenShare.
Change VCLine/ScreenShare Password
Select General Setting
│
Administrator and press
.
Here allows you to change password of VCLink
and ScreenShare. The default password is
“1234”