31
To perform the go to preset positions:
1. Input a preset number (0~255) in the Load Preset column or click a preset number (0~19) in the
Quick Call section.
2. Click Load, the camera will move to the preset position.
When operating the go to preset positions, you can optionally adjust the Preset Speed or
enable/disable the Video Freeze while Preset function.
Video Freeze with Preset: When this function is turned on, the camera will not display the view
along the path when moving from one position to another. The camera will only display the view of
the positions.
Preset Speed: Adjust the preset speed.
To Next Page
Loading...
Need help?
General
