Step 3:
Press F1 to start the firmware upgrade
process. Press to abort the operation and
return to the previous page.
Step 4:
EzRecorder 310 automatically detects
whether a newer version of firmware is
available for upgrade. Once the firmware
upgrade process has completed, press OK to
restart EzRecorder 310.
The firmware upgrade process takes up approximately 3–5 minutes.
Firmware upgrade requires at least 256 MB free space of the storage device (USB/HDD).
If problems encountered during firmware upgrade, please clear all the data stored on your USB storage device
and repeat the process above.
NEVER power off the device or unplug the power supply during the firmware upgrade process. If the
firmware upgrade is interrupted for any reason, the device may crash.
To Next Page
Loading...