03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
15
Ribbon unwinding mandrel
(type 1)
Tools
– 2.5 and 2 mm allen keys
– Size 7 and 8 socket wrenches
– Plastic hammer
– Philips screwdriver, medium size
Preparation for dismantling
1. Remove front and rear hood.
2. Unscrew the contact spring (5).
3. Remove the ribbon end sensor (6).
How? - See paragraph Ribbon end
sensor on page 32.
4. Remove the securing nut (7).
Continued on the next page.
6
5
7
To Next Page
Loading...
