03/10 Rev. 5.04-04 SERVICE MANUAL Service Mechanics
64-xx – 64-xx Dispenser
76
5. Use the screws that came with the kit to
fix two of the brush tubes (5) using the
holes (6) in the printer wall.
Arrangement of the tubes/brushes
according to the pictures!
6. Unscrew the ribbon deflection tube by
removing the screw (8). Replace it by a
brush tube.
Arrangement of the tubes/brushes
according to the pictures!
7. Assemble the print head motor.
8. Adjust the print head aperture.
How to? - read a description in
paragraph Fehler! Verweisquelle
konnte nicht gefunden werden. on
page Fehler! Textmarke nicht
definiert..
9. Mount the housing parts.
6
6
5
5
5
5
7
8
7
To Next Page
Loading...
