05/10 Version 5.05-00 USER MANUAL Commissioning and Operation
AP5.4 – AP5.6
15
Message mode Status messages are used to indicate errors or certain operating statuses.
When status messages appear, the background colour of the display becomes
red. When a status message is present, the printer waits until the error has
been eliminated and/or acknowledged. When the error is acknowledged, the
printer switches from message mode to offline mode (depending on the error
and state of previous process).
Status messages consist of the status number together with a brief descrip-
tion:
For instance, status message 5001 (see above) appears when the printer is
configured for punched label material but continuous material (unpunched) is
inserted. In this case, the printer continues to transport the material for a few
more seconds until the error message appears.
For more on the status messages as well as a detailed list of all status mes-
sages, see Status Reports .
Standalone mode In standalone mode (operation without data connection to computer), print
jobs are not transferred via data cable but are instead stored on a SD card.
From there, you can access them from the control panel or using a connected
keyboard.
For more information on standalone mode, see topic section “Advanced Appli-
cations”, chapter Standalone Operation on page 9.
Status 5001
No punch detected
To Next Page
Loading...
