Avery Dennison AP5.6 - Operating in Offline Mode

05/10 Version 5.05-00 USER MANUAL Commissioning and Operation
AP5.4 – AP5.6
20
Label length
< 40 mm
¯ If very short labels are to be printed (PRINT PARAMETERS > Material length is
set to < 40mm), the printer is automatically initialised for the material before
printing.
For more information, see the parameter description DISPENSER PARA >
Calibration mode under Info Printouts and Parameters .
Operating in offline mode
• Changing from offline to online mode:
• Switching into online mode when print job is stopped
• Slow material and ribbon feed:
• Material is reversing below the printhead:
• Reset
• Opening the parameter menu
• Feeding material to next punch or while button is pressed:
• Setting the label length automatically:
For more information, see topic section “Setup”, chapter Setting the label
length automatically .
OFFLINE x JOBS
ONLINE x JOBS
OFFLINE x JOBS
Stopped xx
ONLINE x JOBS
Stopped xx
OFFLINE x JOBS OFFLINE x JOBS
feeding...
OFFLINE x JOBS OFFLINE x JOBS
feeding...
OFFLINE x JOBS OFFLINE x JOBS
OFFLINE x JOBS PRINT INFO
OFFLINE x JOBS OFFLINE x JOBS
feeding...
OFFLINE x JOBS OFFLINE x JOBS
Man Calibrate
Online
Online
Feed
Online
Cut Online
C
ut
O
nline
Feed
Prog
Feed
Feed
Prog