05/10 Version 5.05-00 USER MANUAL Commissioning and Operation
AP5.4 – AP5.6
14
E Prog button
– Offline: Opens Parameters menu
– Parameter menu: Moves back one step in Parameters menu or quits
the menu.
For more functions and more details, see
• section Offline mode auf Seite 14 and section Online mode auf
Seite 14
• topic section InfoPrintouts and Parameters
Operating modes
Offline mode
No print jobs are queued.
In Offline mode, you can change the printer settings. This operating mode is
normally active when the printer is first turned on. Print jobs are received at the
selected port but not processed.
¯ To set the printer so that it immediately switches to online mode after being
turned on, set SYSTEM PARAMETER > Turn-on mode to “Online”.
Online mode In Online mode, printjobs are received and immediately processed.
• No print jobs are queued.
• If data is currently being transferred to the printer, this is indicated by a sin-
gle dot to the lower right of the displayed number of current jobs.
An additional dot at mid-line height indicates when the interpreter is active.
– No dot: no data to interpret.
– Dot: The interpreter is currently running (there is still data in the spool-
er)
– Flashing dot: The interpreter is waiting for more data in order to com-
plete a command (no data in spooler).
• During printing, the number of jobs in process (13) are displayed as well as
the remaining quantity (25) of labels to be printed in the current job.
• If a print job has been specified as continuous, the remaining quantity for
this job will be endless.
¯ To stop the printing process, press the Online button.
OFFLINE 0 JOBS
ONLINE 0 JOBS
ONLINE 0: JOBS
ONLINE 13 JOBS
Restcount: 25
ONLINE 13 JOBS
Restcount: endless
To Next Page
Loading...
