17
Model E1010 Indicator User’s Manual
The E1010 provides an RS-232 output for data transmission to a peripheral
device. Refer to the Service Manual for RS-232 interface connections.
If your indicator has a peripheral device connected, from the gross/net
weighing mode press the PRINT key to transmit the selected output(s).
The PRINT annunciator will illuminate while data is transmitted and the data
configured to be printed will be output to the printer.
Print Format #1 for weighing applications
G 1234.56 lb<CR><LF>
Print Format #1 for counting application
Count: 12230
Print Format #1 for peak application
12230 lb<CR>
Communications and Printing
The default serial port param-
eters are 9600 baud, 8 dat-
abits, no parity and 1 stop bit.
Error Messages
The following are displays you may see if problems occur or if invalid
operations are attempted with your indicator:
Display Description
Overrange weight.
Underrange weight.
The unit cannot perform a function. Displayed only while
key is held down.
Displayed while a key is pressed when attempting to
modify a sealed selection without edit privileges.
To Next Page
Loading...
Need help?
General
