Fast Track C400 User Guide28
Effect
The Effect drop-down menu is used to select the
effect to be applied to the Hardware Inputs
and/or Software Returns. There are eight avail-
able reverb types: Three room reverbs, two hall
reverbs, a plate reverb, delay, and an echo. These
effects can be customized by using the following
three controls:
Duration This knob controls decay time (for the
reverbs) or delay time (for delay and echo).
Feedback This knob controls the number of re-
peats for the delay and echo effects. It does not
affect the reverbs.
Volume This knob controls the effects output
level being sent to the FX Returns.
Master
The Master section is for monitoring the main
mixer output.
Master Fader Adjusts the overall level of the
monitor mix.
Master Meters Provides a visual representation of
the audio signal being fed to the associated
hardware output pair.
Status Indicators
Along the bottom-left of the Driver Control
Panel are the following status indicators:
Hardware Connected
This tells you the status of the hardware; if a
properly installed, powered-on Fast Track C400
is connected to the computer.
Streaming
This indicates if audio from a Digital Audio
Workstation or a media player (such as Win-
dows Media Player) is currently streaming audio
to the Fast Track C400.
To Next Page
Loading...
Need help?
General
