Mbox User Guide12
6 After the computer has restarted, connect the
small end of the included USB cable to the USB
port on Mbox and connect the other end to any
available USB port on your computer.
wth
You can now use your Mbox with Pro Tools, or
with any other CoreAudio- or ASIO-compatible
application.
If the USB LED on the front panel of the
Mbox does not illuminate, try unplugging
the USB cable from the Mbox USB port, and
plugging it back in. If the USB LED still does
not illuminate, shut down the computer,
disconnect Mbox and start the computer.
Once the computer has fully restarted,
reconnect Mbox.
Mbox may not function properly if con-
nected to a USB hub. If you need to use a
hub for other USB peripherals, connect the
hub to a separate USB port; Mbox must be
connected to a dedicated port on the com-
puter in order to function properly.
For Pro Tools installation instructions, see
the Pro Tools Installation Guide.
To Next Page
Loading...
Need help?
General
