Muting and Mute Groups 156
Mute Groups
Mute Groups let you mute and un-mute multiple channels simultaneously by pressing a single switch. This section shows how to
assign channels to Mute Groups, and toggle them on/off.
Assigning Channels to Mute Groups
You can assign any types of channels to Mute Groups except VCAs. You can also assign a Channel to multiple Mute Groups. Chan-
nels can be assigned and managed in the Mute Groups tab of the Control page on the external screen, where you can also give Mute
Groups custom names. You can also assign channels to Mute Groups using the MTS, or from the channel encoders in Channel Con-
trol mode.
Assigning and Managing Mute Groups in the Mute Groups Tab
The Control tab provides a Mute Groups sub-tab in which you can manage assignments and name your Mute Groups.
To access the Mute Groups tab:
Navigate the external screen to Control > Mute Groups.
The Mute Groups tab provides the following features as shown in the figure above.
Mute Groups only affect the status of channel Mute switches, and do not affect the on/off status of Aux Sends, output of the Talk-
back/Oscillator section, or the routing of signals to the monitor outputs.
Control > Mute Groups
Mute Groups tab
Item Description
1
Access to up to 24 Mute Groups 24 selectable Mute Groups, each with Mute button and editable name
2
Members list List of channels assigned to the currently selected Mute Group
3
Multi-Assign button Enables/disables Assign to Mute Groups mode
4
Settings cog (gear icon) Commands to manage Mute Group assignments
5
Disable All Mute Groups button To disable (suspend) and re-enable all Mute Groups
To Next Page
Loading...
Need help?
General
