Avidsen Orane 510 - Required Tools and Equipment

EN
7
EN
6
B - PRODUCT DESCRIPTION
2 - EQUIPMENT REQUIRED (NOT INCLUDED)
The tools and screws required for the installation must be in good condition and compliant with applicable
safety standards.
Photocells Attachment of
the flashing light
onto the post
MotorFlashing light
10m cable
4 x 6/10
8m cable
2 x 1.5mm
2
3m cable
2 x 0.5mm
2
Attachment of the
brackets on the
gate: Choose a
screw/nut system
that is suitable for
the thickness of the
gate. There are 4
attachment points
Ø6
Ø4
Ø6
x2 x2
Attachment of
the motors on
the posts
x6 x6
Ø12x100
Ø8x100
Ø12
1 drill
1 spirit level 1 measuring
tape
1 pencil 1 x 19mm box
spanner
and 1 x 13mm box
spanner
1 x 13mm
spanner
1 flat head
screwdriver
1 Phillips screwdriver