Installation
Required Tools and Materials
The following tools are required to complete the camera installation but are not included in the camera
package:
l If you will be installing the NPT adapter (H4F-MT-NPTA), you will need a 1-1/2" NPT female to female
adapter.
Camera Package Contents
Ensure the package contains the following:
l Avigilon™ H4 Fisheye Dome Camera
l Camera Base Mounting Template sticker
l Bracket Mounting Template sticker
l Optional mounting bracket
l Torx screwdriver
l Auxiliary cable
l Desiccant bag
l 3 screws and anchors — for securing the camera to the mounting surface.
l 1 x (M3 x 8mm) T10 Torx screw — for securing the camera base to the bracket.
l 2 x (M4 x 8 Philips) machine screws — for securing the bracket to an electrical gang box.
l Rubber washer
l Rubber grommet
If you are using the optional NPT adapter (H4F-MT-NPTA), ensure the package contains the following:
l NPT adapter for the H4 Fisheye Dome Camera
l NPT lock nut
l 1 x (M3 x 8mm) T10 Torx screw — for securing the camera base to the bracket.
l Thread seal tape
Installation Steps
Complete the following steps to install the camera:
Removing the Dome Cover 7
Preparing the Cables 8
(Optional) Configuring microSD Card Storage 10
Installation 6
To Next Page
Loading...
