Mounting the Dome Camera 10
Connecting Cables 24
Assigning an IP Address 25
Accessing the Live VideoStream 26
Installing the Dome Cover 26
Configuring the Camera 27
Removing the Dome Cover
1. From the bottom of the dome camera, remove the white plug covering the Ethernet cable entry hole.
Once removed, the plug can be discarded.
Be aware that a vacuum may occur within the camera during shipping. Removing the plug may allow the
dome cover to be removed more easily.
2. Remove the dome cover by loosening the screws that fix the cover to the base. Use the provided Torx
screwdriver to loosen the screws.
Removing the Dome Cover 7
To Next Page
Loading...
