8. Link LED
Indicates if there is an active connection in the Ethernet port.
9. Connection status LED
Provides information about camera operation. For more information, see LED Indicators on page31.
10. Lanyard
Anchors the dome cover to the camera base.
Bottom View
1. Primary mounting slot
The primary mounting point for the camera.
If using the optional mounting bracket or NPT adapter, align the primary camera post (largest diameter
post) with the primary mounting slot.
NOTE: If you are planning to mount the camera on a wall, be aware that the primary mounting slot aligns
with the top of the video image.
2. Secondary mounting slots
Mounting points for the camera.
Bottom View 3
To Next Page
Loading...
