l Camera's web browser interface: http://<camera IP address>/
l Network Video Management software application (for example, Avigilon Control Center (ACC)™).
l ARP/Ping method. For more information, see Setting the IP Address Using the ARP/Ping Method on
page33.
NOTE: The default camera username is administrator with no password.
Accessing the Live VideoStream
Live video stream can be viewed using one of the following methods:
l Web browser interface: http://< camera IP address>/
l Network Video Management software application (for example, the Avigilon Control Center software).
NOTE: The default camera username is administrator with no password.
Installing the Dome Cover
Be careful not to touch or scratch the dome bubble. Any marks or fingerprints on the dome bubble may cause
unwanted reflections from the IR illuminators.
1. Discard the desiccant pack that is glued to the camera base.
2. On the new desiccant pack provided with the camera, remove the adhesive backing and fold down the
sides over the adhesive.
3. Place the new desiccant pack in the same location as the old pack and make sure it sticks to the camera.
4. Attach the dome cover to the base.
Tip: Make sure the IR contacts are aligned to fit the dome cover to the base.
Accessing the Live VideoStream 26
To Next Page
Loading...
