If you do not need to use the auxiliary cable, skip the relevant steps.
1. Install the electrical gang box as required.
2. Align the bracket mounting holes to the mounting points on the electrical gang box.
If you are mounting the camera to a wall, make sure the primary mounting post on the bracket is at the
top, or the video image will be rotated.
3. Use the provided machine screws to secure the bracket to the electrical gang box.
4. If you are installing the auxiliary cable, remove the black plug covering the auxiliary cable entry hole.
Otherwise, keep the cover on the auxiliary cable entry hole to prevent dust from entering the dome
camera.
Mounting the Dome Camera to an Electrical Box 18
To Next Page
Loading...
