l In the camera web interface, the microphones are configured from the Microphone page. You can adjust
the microphone volume by changing the gain.
o
Internal Microphone Gain — configures the gain for the microphone that is built into the camera.
o
External Source Gain — configures the gain for any line level audio input that is connected to the
pink audio input connector on the auxiliary cable.
For more information, see the Camera Web Interface User Guide.
l In the ACC Client software, the microphones are configured in the Microphone dialog box that can be
accessed from the camera's Setup tab. You can adjust the microphone volume by changing the gain and
link the audio to other cameras in the site.
o
Audio Input 1 — configures the gain for the microphone that is built into the camera.
o
Audio Input 2 — configures the gain for any line level audio input that is connected to the pink
audio input connector on the auxiliary cable.
For more information, see the Avigilon Control Center Client User Guide.
Configuring the Microphone 30
To Next Page
Loading...
