Operating Manual for Controller VIBTRONIC
®
SC(E)…-2
©2002 AViTEQ Vibrationstechnik GmbH Version 02/2003 1–5
1
1.4 Installation and Operating Personnel
Persons involved with installation, commissioning, assembly, disassembly, adjust-
ment or maintenance must have read and understood this operating manual in its
entirety; in particular the safety notes. If you have any questions, we would be
glad to help you!
All work on the controller must be carried out by qualified personnel (electricians
or persons trained in electrical engineering according to IEC 364 and
DIN EN 60204-1).
The controllers may only be serviced by personnel trained and authorised by
AViTEQ Vibrationstechnik GmbH, D-65795 Hattersheim-Eddersheim. AViTEQ
Vibrationstechnik GmbH, Hattersheim-Eddersheim, is not liable for injuries or dam-
age to property if this is not observed. This does not apply if liability for loss of life
or limb or loss of health is mandatory.
Prior to installation and/or
commissioning, you should
familiarise yourself with all
details of the controller and
with the connection options
of the magnetic vibrator. For
more information, see the
chapter in the operating man-
ual on connecting the mag-
netic vibrators.
To Next Page
Loading...
Need help?
General
