Troubleshooting – Fault Causes and Remedy
7–1 ©1998 AViTEQ Vibrationstechnik GmbH Version 02/2003
7 Troubleshooting
7.1 Repairs
The controller contains no components which can be serviced or repaired by the
assembler or user. Do not open the units - send them to AViTEQ Vibrationstechnik
GmbH, D-65795 Hattersheim-Eddersheim if there is a fault.
When connected to mains, dangerously high voltages are present inside the con-
troller and inside the magnetic drive. Touching electrically live components can be
lethal! Before switching on mains power, ensure that no live parts can be touched.
7.2 Fault Causes and Remedy
Disassembling the controller is life-threatening and may result in damage to the
device! There are no components within the device which can be maintained or
repaired by the user! Do not attempt to make any repairs yourself! Never disas-
semble the controller, not even if the power is disconnected! In the event of device
malfunction, ship the entire device to AVITEQ Vibrationstechnik, D-65795 Hatter-
sheim-Eddersheim, Germany! We will see to the fastest repair possible!
In the following table you will find information regarding possible faults which
could occur during installation or during operation. Consult us, however, prior to
performing error rectification measures!
DANGER!
DANGER!
To Next Page
Loading...
Need help?
General
