AviteQ Vibtronic SC-2 Series - Materials Used in the Units

Transport, Storage –
2–3 ©1998 AViTEQ Vibrationstechnik GmbH Version 02/2003
2.2.3 Materials Used in the Units
In case of disposal by the customer, and when exchanging components, the cur-
rent local waste and disposal regulations apply and should be observed. We
accept no responsibility for improperly disposed of parts and components!
l For the disposal of the controllers, the regulations for the disposal of elec-
tronic parts and components apply.
l The power semiconductors used (thyristor and diode module) do not contain
beryllium and thus may be disposed of as electronic waste.
Detailed information concerning the used materials is available from us upon
request. In case of doubt, take advantage of our disposal offer!
NOTE