Commissioning – Commissioning with AViTEQ magnetic vibrator
5–4 ©1998 AViTEQ Vibrationstechnik GmbH Version 02/2003
F
In addition, measure the maximum working stroke and compare the value
with the data provided by the manufacturer for the vibration device being
used.
$
The permissible values for vibrator current and voltage specified on the type
plate must not be exceeded! There is otherwise a risk of the aforementioned
destructive collision mode or of overheating of the magnetic system!
F
If the working stroke specified by the manufacturer cannot be reached, check
the natural frequency of the vibration device, if applicable.
To Next Page
Loading...
Need help?
General
