AVL F-FEM-CNT User Manual

11
What you should know
F-FEM-CNT — User’s Guide
Contents & Scope This manual documents the I/O component when using the F-FEM-CNT in a test
bed system and describes the hardware used:
 Connector pin out
 Power supply
 Grounding and shielding
 Sensor types
Secondary litera-
ture
 F-FEM Parameterization
1.5.1 Typographic Conventions
Safety messages:
Additional safety symbols:
Notes:
NOTICE
The installation (putting into operation) may only be executed by commissioning
engineers or authorized AVL personnel.
WARNING
Indicates a hazardous situation which – if not avoided – could result in death or
serious injury.
CAUTION
Indicates a hazardous situation which – if not avoided – could result in minor or
moderate injury.
Voltage hazard warning
NOTICE
This text indicates situations or operation errors which could result in property
damage or data loss.
Information
This text indicates important information or operating instructions. Not observing
these instructions could inhibit or impede you from successfully completing the
tasks described in this documentation.

AVL F-FEM-CNT Specifications

General

Brand	AVL
Model	F-FEM-CNT
Category	Measuring Instruments
Language	English