AVL F-FEM-CNT - Debug;Jtag Connection: X27

49
Operation
F-FEM-CNT — User’s Guide
4.4.5 Debug/JTAG Connection: X27
NOTICE
This connector may only be used for the production test.
No cable may be connected during regular operation.)
Fig. 32 Debug/JTAG connection: X27
Pin Signal at X27
1DGND
2 FLASH Ry/By
3 FLASH WEn
4 VDD out (3.3V) max. 50 mA
5DGND
6nc
7DGND
8 WDDIS
9EMUn
10 nc
11 TMS
12 TCK
13 TRSTn
14 TDI
15 TDO
Case Shielding
Tab. 10 Pin assignment