Need help?Do you have a question about the AVL F-FEM-CON and is the answer not in the manual?
General| Brand | AVL |
|---|---|
| Model | F-FEM-CON |
| Category | Measuring Instruments |
| Language | English |
Details various safety warnings including electrical voltage, explosion, and fire hazards.
Contains crucial warnings and safety instructions for user adherence.
Explains the warranty seal and the consequences of unauthorized tampering.
Defines the product's intended application and outlines liability limitations.
Information on F-FEM-CON's role in PUMA system, network communication, and capabilities.
Defines the manual's target audience, scope, and the assumed technical knowledge of users.
Outlines the F-FEM-CON's performance features, data acquisition capabilities, and specifications.
Illustrates the F-FEM-CON's integration within the PUMA Open test bed system and its components.
Explains the analog signal conversion, data transfer, and time synchronization within the system.
Describes the F-FEM-CON as part of a network of Front End Modules and their interconnections.
Explains data visualization of sampled F-FEM-CON data using the POI application.
Presents a schematic overview of the F-FEM-CON's internal components, interfaces, and connections.
Lists all components included in the F-FEM-CON device delivery, including accessories.
Details mechanical installation requirements, including external dimensions, space, and mounting procedures.
Details electrical installation steps, including power supply, wiring, grounding, and shielding requirements.
Describes the process for installing or loading the F-FEM-CON firmware.
Explains the functionality, features, and specifications of the F-FEM-CON's analog input channels.
Details the specific analog input channel designed for load cell measurements and its specifications.
Describes the F-FEM-CON's analog output channels, including voltage and current outputs, and specifications.
Explains the functionality, circuit design, and specifications of the F-FEM-CON's digital inputs.
Details the functionality, circuit design, and specifications of the F-FEM-CON's digital outputs.
Covers the input circuits for various sensor types and the functionality of counter channels.
Describes the two frequency output channels, their signal types, and operating modes.
Explains the watchdog function for monitoring the PUMA Open or EMCON system's operation.
Details the CAN interface, available only on F-FEM-CON Advanced, and its transmission specifications.
Explains the status LEDs and the seven-segment display indicating module status and errors.
Provides guidelines on aging, calibration intervals, and procedures to maintain accuracy.
Details the location and function of all plug connections, including pin assignments for various connectors.
Describes the IEEE 1394 repeater used to extend network cable distances.
Details the F-FEM-DIO module and its function as an extension to the F-FEM-CON.
Explains the RSM8 relay submodule and its connection via ribbon cable.
Describes the EMCON Strip extension and its connection to sockets X19 and X20.
Introduces the Counter Signal Adapter Advanced and refers to its operation manual for details.
Provides key technical specifications, including case, power, temperature, and channel details.
Details the CE compliance, including EMC and Low Voltage Directive standards met by the device.
To Next Page
